In an attempt to keep away trespassers from surrounding slums, a new high-tech security system will be installed, which will have sensors weaved into a barbed wire fence
In line with its vision to transform the Chhatrapati Shivaji International Airport into one of the world’s smartest airports, the much-awaited new terminal (T2) has put in place high-tech security measures to keep out intruders at its perimeter. The security around the new terminal and the entire airport has been upgraded in such a manner that no one from the peripheral slum areas around the airport can enter the premises.
If intruders breach the airport perimeter fence line, they will receive a minor shock and a signal will be relayed to the control room for action
At various locations in and around the airport, high-tech night vision cameras have been installed that will capture the intruders and immediately relay the details within seconds to the control room that will be manned by a surveillance team around the clock. The joint co-ordination control (JCC) room of T2 is segregated in to three parts that form the ‘GVK’; G (ground staff) V (flight operations) K (support team that will include IT, Customs and CISF personnel).
The JCC, which is located on the third floor of the new terminal, currently has 300 staff and will be increased from February 12, when the airport is thrown open for operations. T2 is under the surveillance of 2,000 cameras (1,600 for security and 400 for the JCC) that are likely to increase with further development of the terminal.
Not only this, but also another security system Perimeter Intrusion and Detection System (PIDS) has also been installed at the periphery of the airport in order to detect intruders. This system, which is based on taut wire technology, will have sensors weaved into a barbed wire fence surrounding the airport perimeter. Once the fence is breached, the wires will not only deliver a mild shock to the intruder, but an alert will also flash on to surveillance monitors at the JCC, giving the location of the breach, for a security response.
How it works
>> A pre-determined number of steel barbed wires are tensioned between well-anchored posts to achieve an intrusion detection system as well as a physical barrier
>> Each of the tension sensors detects a change in a fixed load signal created by pulling, tempering or cutting the barb wire, triggering
>> Taut wire fence can be installed practically anywhere, utilising less space than any other system providing both a physical deterrent and intrusion detection in one, while maintaining the lowest false alarm rate in PIDS systems
>> It is the first choice in most secure perimeters due to its effectiveness, reliability, durability, and ability to withstand rough weather conditions as well as the test of time
Benefits of the new security systems
>> Lowest false alarms
>> Formidable physical barrier
>> Reliable intrusion detection
>> Minimal maintenance
>> Cost effective
>> High probability of detection
>> Less susceptible to the weather/rain
Number of surveillance cameras in operation at T2
Spotted: Virat Kohli, Anushka Sharma and other celebs at Mumbai airport
Photos: Salman Khan's 'special friend' Iulia Vantur at a song launch
Photos: Hrithik Roshan, Anushka Sharma, other celebs dazzle at event
In Pictures: Sex scandals involving Indian politicians
Photos: Abhishek Bachchan and Farah Khan at Boman Irani's birthday bash